Pediatric Bed
Compact pediatric hospital bed featuring CRCA rectangular-tube framework, perforated CRCA sheet platform, CRCA pipe head and foot bows, swing/drop-down side railings, fixed legs with rubber shoes and a powder-coated finish for pediatric wards, hospitals, clinics and institutional healthcare requirements.
Pediatric Hospital Bed for Child Patient Care Areas
The IndoSurgicals Pediatric Bed is a compact hospital-bed configuration intended for healthcare areas where pediatric patients require a dedicated patient-support platform.
The bed is constructed with a CRCA rectangular-tube framework and a perforated CRCA sheet top. CRCA pipe head and foot bows incorporate vertical tube supports, while swing/drop-down side railings provide a physical boundary beside the patient-support area and can be lowered for appropriate bedside access.
Unlike castor-mounted mobile hospital beds, this model uses fixed legs fitted with rubber shoes. Its published overall dimensions are approximately 137 × 76 × 60 cm.
What is a Pediatric Hospital Bed?
A pediatric hospital bed is a patient bed designed in a smaller format than many standard adult hospital beds and intended for use in healthcare areas caring for pediatric patients.
This model combines a compact patient platform with raised head and foot structures and swing/drop-down side railings.
The side-rail configuration allows a physical boundary to be maintained alongside the mattress area while also allowing the railing to be lowered when healthcare staff require appropriate access.
Key Features
CRCA Tube Framework
Rectangular CRCA tubes form the principal structural framework of the pediatric bed.
Perforated CRCA Sheet Top
A perforated CRCA sheet forms the structural patient-support platform beneath the mattress.
CRCA Head & Foot Bows
Head and foot bows are constructed from CRCA pipes with vertical tube supports.
Swing / Drop-Down Rails
Side railings can be lowered to permit appropriate patient access according to their operating design.
Fixed-Leg Configuration
The published model uses fixed legs rather than a castor-mounted mobile base.
Rubber Shoes
Rubber shoes are fitted at floor contact points on the bed legs.
Compact 137 cm Length
Approximate overall published length is 137 cm.
76 cm Width
Approximate overall published width is 76 cm.
Powder-Coated Finish
Applicable metal surfaces are pre-treated and powder coated for a uniform finished surface.
CRCA Rectangular-Tube Framework
The main supporting frame is constructed from CRCA rectangular tubes.
The framework supports the perforated sheet platform, head and foot structures, side railings and fixed-leg base of the pediatric bed.
Perforated CRCA Sheet Patient Platform
The bed uses a CRCA perforated sheet top as the patient-support structure beneath an appropriate pediatric mattress.
This is a fixed platform configuration; the current this model specification does not publish electric or mechanical backrest, knee-rest or Hi-Lo adjustment.
CRCA Pipe Head & Foot Bows
The head and foot structures are manufactured from CRCA pipes with vertical tube supports.
These components form the end structures of the bed and complement the CRCA framework and side-rail arrangement.
Swing / Drop-Down Side Railings
One of the defining features of this model is its swing/drop-down side railing configuration.
Raised Position
When appropriately positioned, the railing forms a physical boundary alongside the mattress and patient-support platform.
Lowered Position
The drop-down arrangement allows greater bedside access when the railing is lowered according to its operating mechanism.
Fixed Legs with Rubber Shoes
The Pediatric Bed is supported on fixed legs fitted with rubber shoes.
This distinguishes this model from pediatric hospital beds supplied with castor-mounted mobile bases.
Fixed Bed Configuration
The current product specification does not list castors or a wheeled mobility system.
Rubber Floor Contact
Rubber shoes provide the published floor-contact interface at the bed legs.
Pediatric Bed Dimensions
The published overall dimensions of the IndoSurgicals Pediatric Bed are approximately 137 cm long × 76 cm wide × 60 cm high .
These dimensions can assist pediatric wards, healthcare planners, distributors and procurement teams when evaluating room layouts and institutional furniture requirements.
Pre-Treated & Powder-Coated Finish
Applicable metal components are pre-treated and powder coated to provide a consistent finished surface suitable for regular institutional use.
Routine cleaning and maintenance should follow the healthcare facility's procedures and use agents compatible with the product's metal surfaces and powder-coated finish.
Suitable Healthcare Applications
Pediatric Bed vs Standard Adult Hospital Bed
Pediatric Bed – this model
Provides a compact 137 × 76 cm patient-support footprint with swing/drop-down side railings and fixed legs.
Standard Adult Hospital Bed
Adult hospital-bed models are generally designed around larger patient platforms and may incorporate different adjustment, mobility and railing systems depending on the model.
Selection should be based on the patient's size and clinical requirements as well as the healthcare facility's mattress, safety, load and dimensional requirements.
Pediatric Bed Selection & Safety Considerations
Pediatric hospital-bed selection requires particular attention to patient size, side-rail configuration, mattress compatibility and the space between the mattress, bed frame and rail structures.
Healthcare facilities should verify the appropriate mattress and bed configuration for the intended patient population and follow their applicable pediatric patient-safety procedures.
Pediatric Bed Specifications
| Product Name | Pediatric Bed |
|---|---|
| Brand | IS IndoSurgicals® |
| Product Type | Pediatric Hospital Bed |
| Framework | CRCA rectangular tubes |
| Patient Platform | CRCA perforated sheet top |
| Head & Foot Bows | CRCA pipes with vertical tube supports |
| Side Railings | Swing / drop-down design |
| Leg Configuration | Fixed legs |
| Leg Shoes | Rubber shoes |
| Overall Length | Approx. 137 cm |
| Overall Width | Approx. 76 cm |
| Overall Height | Approx. 60 cm |
| Overall Size | Approx. 137 cm (L) × 76 cm (W) × 60 cm (H) |
| Finish | Pre-treated and powder coated |
| Mobility | Fixed configuration; castors are not listed in the published specification |
| Suitable For | Pediatric wards, children's healthcare areas, hospitals, clinics, healthcare institutions and institutional procurement |
Pediatric Bed for Hospitals & Institutional Procurement
This model is suitable for institutional buyers seeking a compact fixed pediatric hospital bed with swing/drop-down side railings and CRCA steel construction.
Its published 137 × 76 × 60 cm dimensions, perforated CRCA platform, vertical-supported head and foot bows, powder-coated finish and fixed-leg design can be considered when preparing pediatric ward specifications, hospital projects and institutional tenders.
Pediatric Bed Manufacturer, Supplier & Exporter in India
IndoSurgicals Private Limited manufactures, supplies and exports pediatric hospital beds and other hospital furniture for hospitals, healthcare institutions, government procurement, dealers, distributors and international buyers.
The IndoSurgicals Pediatric Bed – this model combines a compact CRCA patient-support platform, swing/drop-down side rails, CRCA head and foot structures, fixed legs with rubber shoes and powder-coated construction in a dedicated pediatric-bed configuration.
Explore the complete range of Pediatric Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Pediatric Ward, Institutional & Export Requirements
Contact IndoSurgicals for Pediatric Bed specifications, hospital and pediatric ward projects, government and institutional procurement, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicals