Single-step hospital foot stool featuring a tubular M.S. steel framework, rubber-mat step, aluminium edge angle, rubber shoes and epoxy powder-coated finish , designed to provide a compact raised stepping platform for appropriate hospital and clinical use.
The IndoSurgicals Foot Stool Single is a compact hospital furniture accessory designed to provide one raised step where additional standing elevation is required for suitable healthcare activities.
The stool combines a tubular mild-steel framework with a rubber-covered step. An aluminium angle surrounds the step edge, while rubber shoes provide floor contact at the base of the frame.
Its approximate size of 460 × 510 × 230 mm provides a low, single-step configuration suitable for appropriate hospital, examination and clinical environments.
One raised step provides a simple elevation platform for appropriate clinical and hospital applications.
Mild-steel tubular construction forms the supporting structure of the foot stool.
The step surface is covered with a rubber mat, providing a defined foot-placement surface.
An aluminium angle surrounds the step edge as part of the finished step construction.
Rubber shoes are fitted to the supporting frame for floor contact during stationary use.
M.S. framework incorporates an epoxy powder-coated finished exterior.
The Foot Stool Single measures approximately 460 mm length × 510 mm width × 230 mm height .
The approximately 230 mm overall height distinguishes this model from the taller two-step version and provides a compact single level of elevation.
This model incorporates one rubber-covered step, making it suitable where only a single level of additional elevation is required.
The step is supported by the tubular M.S. framework and finished around its perimeter with an aluminium angle.
The single step incorporates a rubber mat, providing a defined surface for foot placement during appropriate use.
The rubber covering clearly identifies the usable stepping surface on top of the metal structure.
Rubber can provide greater surface friction than smooth exposed metal, subject to the mat remaining clean, dry and in good condition.
The product specification states that the rubber-mat step is surrounded by an aluminium angle. This angle forms part of the step-edge construction and provides a defined perimeter around the step surface.
The aluminium angle defines the outer edge of the rubber-covered stepping platform.
This model combines a mild-steel frame, rubber step surface and aluminium step-edge component.
The Foot Stool Single is manufactured with a tubular M.S. steel framework that forms the primary supporting structure beneath the step.
M.S. forms the structural framework of the foot stool.
Tubular members support the single raised step.
Framework incorporates an epoxy powder-coated finish.
The tubular framework is mounted on rubber shoes, providing contact between the frame and the floor during normal stationary use.
Rubber shoes separate the tubular frame ends from direct contact with the floor surface.
No castors or wheels are specified for this model, identifying it as a stationary foot stool.
A single-step hospital foot stool can provide additional standing elevation where healthcare staff require a modest increase in working height for suitable examinations, procedures or equipment access.
The stool may be positioned in suitable clinical areas where a single raised platform is required by trained personnel.
The 230 mm-high single-step configuration provides a compact alternative to a taller double-step stool.
The stool should be placed on a suitable level floor and checked for stability and condition before use. Rubber mats and rubber shoes should be inspected periodically for wear, contamination or damage.
The tubular M.S. framework incorporates an epoxy powder-coated finish, providing a finished metal exterior suitable for routine institutional handling.
Powder coating provides a finished outer surface over the mild-steel framework.
The frame, rubber mat and aluminium component should be cleaned using methods compatible with their respective materials.
This model is the single-step Foot Stool, with an approximate overall height of 230 mm. IndoSurgicals also offers a separate double-step configuration for applications where two levels of elevation are required.
Using the words Single or Single Step consistently in quotations, product pages and tender documents helps distinguish this model from the double-step version.
| Product Name | Foot Stool Single |
|---|---|
| Brand | IS IndoSurgicals® |
| Approx. Overall Size | 460 mm (L) × 510 mm (W) × 230 mm (H) |
| Number of Steps | One |
| Framework | Tubular M.S. Steel |
| Base | Rubber Shoes |
| Step Surface | Rubber Mat |
| Step Edge | Surrounded by Aluminium Angle |
| Finish | Epoxy Powder Coated |
| Mobility | Stationary; castors are not specified |
| Load Capacity | Not specified in the current product information |
| Primary Use | Single raised platform for appropriate healthcare and institutional applications |
| Suitable For | Hospitals, examination rooms, procedure areas, clinics and healthcare institutions |
Buyers should consider required step height, available floor space, intended application, surface condition and required load capacity when selecting a hospital foot stool.
IndoSurgicals Private Limited manufactures, supplies and exports hospital ward furniture for hospitals, healthcare facilities, medical institutions, dealers, distributors and institutional buyers.
The IndoSurgicals Foot Stool Single – this model combines a rubber-covered single step, aluminium edge angle, tubular M.S. framework, rubber shoes and epoxy powder-coated finish for appropriate hospital and clinical applications.
Explore the complete range of Hospital Ward Furniture or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Foot Stool Single specifications, hospital furniture procurement, institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
