Mobile hospital over bed table with a laminated 80 × 38 cm tabletop, fingertip-pressure height adjustment from 76 to 106 cm, steel-tube construction and four castors , designed to provide a convenient patient-side surface in hospital rooms, wards and healthcare facilities.
The IndoSurgicals Over Bed Table Height Adjustable is designed to provide a practical movable surface that can be positioned over or alongside a patient's bed according to the room layout and care requirement.
Its height can be adjusted between approximately 76 cm and 106 cm using a fingertip-pressure mechanism, allowing healthcare staff to set the tabletop at a suitable working height within the available adjustment range.
The laminated tabletop can be used for appropriate patient activities such as meals, reading, writing and other bedside tasks, while the four-castor base allows convenient repositioning within the patient-care area.
Table height can be adjusted from approximately 76 cm to 106 cm to suit different bedside positioning requirements.
Height adjustment is operated by a fingertip-pressure mechanism for convenient setting of the tabletop level.
Laminated surface measuring approximately 80 × 38 cm provides a practical area for suitable patient bedside activities.
Outer support structure uses approximately 40 × 80 mm steel tubing for structural support.
Legs are manufactured from approximately 40 mm square steel tubing for a robust mobile base.
Mounted on four 5 cm diameter castors for convenient movement and repositioning within patient rooms.
The table height can be adjusted within an approximate range of 76 cm to 106 cm.
Height adjustment allows the tabletop position to be adapted according to the bed height, patient position and intended bedside activity, subject to compatibility with the particular bed and room arrangement.
The this model model uses a fingertip-pressure adjustment mechanism rather than the separate gear-handle mechanism used on another IndoSurgicals over bed table model.
The mechanism allows the tabletop height to be changed within its specified range without requiring a separate gear-handle arrangement.
Adjustable height helps the table accommodate different patient-bed and seating arrangements where dimensions permit.
The tabletop measures approximately 80 cm in length × 38 cm in width and incorporates a laminated surface.
Provides useful horizontal working length for common bedside activities.
Compact width provides usable surface area while remaining appropriate for a mobile over-bed design.
Provides a practical finished surface for suitable bedside use and routine cleaning.
An over bed table provides a movable horizontal surface that can help patients perform appropriate everyday activities without requiring a conventional bedside desk.
Where permitted by the care plan, the tabletop can provide a convenient surface for meals, beverages and associated items.
The surface can also support books, writing materials and other suitable lightweight personal items during bedside use.
The table uses a steel framework designed to support the adjustable tabletop and mobile base.
Approx. 40 mm × 80 mm steel-tube construction.
Approx. 40 mm square steel tubing.
Pre-treated and epoxy powder-coated steel structure.
The table is mounted on four castors of approximately 5 cm diameter, allowing it to be repositioned within the patient-care area.
The castor-mounted base allows healthcare staff to move the table toward or away from the bedside as required.
Mobility can assist when furniture needs to be temporarily repositioned for patient access, housekeeping or room reorganisation.
Move the table into an appropriate position relative to the patient's bed or chair.
Use the fingertip-pressure mechanism to adjust the tabletop within the specified 76–106 cm range.
Ensure the table is positioned without interfering with the patient, bed components, tubing, cables or other equipment.
Place only suitable items on the tabletop and follow the facility's normal patient-care and furniture-use procedures.
The steel framework is pre-treated and epoxy powder coated to provide a finished outer surface suitable for regular use in hospital and clinical environments.
The powder-coated surface provides a finished exterior appropriate for routine hospital furniture handling.
Tabletop and frame surfaces can be cleaned according to facility procedures using products compatible with the respective materials.
| Product Name | Over Bed Table Height Adjustable |
|---|---|
| Brand | IS IndoSurgicals® |
| Tabletop | Laminated Surface |
| Approx. Tabletop Size | 80 cm (L) × 38 cm (W) |
| Height Range | Approx. 76 cm to 106 cm |
| Height Adjustment | Fingertip-Pressure Mechanism |
| Outer Support | Approx. 40 mm × 80 mm steel tube |
| Legs | Approx. 40 mm square steel tubing |
| Castors | Four castors, approx. 5 cm diameter |
| Finish | Pre-treated and epoxy powder coated |
| Primary Use | Adjustable patient-side surface for suitable bedside activities |
| Suitable For | Hospitals, patient rooms, wards, clinics, nursing facilities and institutional healthcare environments |
Healthcare facilities should consider bed dimensions, under-bed clearance, required tabletop height, room layout and the intended patient use when selecting an over bed table.
IndoSurgicals Private Limited manufactures, supplies and exports hospital ward furniture for hospitals, healthcare facilities, medical institutions, dealers, distributors and institutional buyers.
The IndoSurgicals Over Bed Table Height Adjustable – this model combines a laminated tabletop, fingertip-pressure height adjustment, steel-tube framework and castor-mounted mobile base for practical patient-side use.
Explore the complete range of Hospital Ward Furniture or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Height Adjustable Over Bed Table specifications, hospital furniture procurement, institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
