Manual hospital bed with a screw-operated adjustable backrest, two-section perforated CRCA sheet platform, 10 cm swivel castors and four IV-rod provision locations, designed for general wards, patient rooms, clinics and institutional healthcare settings.
The IndoSurgicals Semi Fowler Bed General provides a practical step between a fixed plain hospital bed and hospital beds with multiple positioning functions.
Its two-section patient platform includes an adjustable backrest section operated by a manual screw mechanism. This allows healthcare staff to raise or lower the patient's upper body when a change from the flat position is required.
The bed is mounted on 10 cm diameter swivel castors for mobility and incorporates four provision points for an IV or saline stand. Its overall dimensions are 206 × 90 × 60 cm.
A Semi Fowler hospital bed is designed with an adjustable backrest that allows the patient's upper body to be elevated from the horizontal position.
Compared with a plain fixed bed, the adjustable back section provides healthcare staff with greater flexibility when positioning a patient for rest, nursing care, feeding, examination or other appropriate bedside activities.
On this particular model, the backrest is adjusted manually through a screw mechanism. No electrical power is required for the positioning function.
The patient platform is divided into two sections, allowing the backrest portion to be repositioned independently.
Both sections are manufactured from perforated, machine-press-bent CRCA sheet for a practical hospital-bed platform.
A screw-operated mechanism allows the backrest section to be raised or lowered without electricity.
The bed is mounted on 10 cm diameter swivel castors to assist movement within the healthcare facility.
Four provision points allow an IV or saline stand to be positioned at a suitable location around the bed.
The metal structure is epoxy powder coated to provide a uniform finished surface for regular institutional handling.
The backrest is the principal positioning feature of the Semi Fowler Bed General. A manually operated screw system allows the upper section of the bed platform to be elevated or returned toward the flat position.
The adjustment does not depend on an electric motor, control handset or mains power supply.
Raising the backrest allows the patient's torso to be supported in an elevated position when clinically appropriate.
The mattress-support platform consists of two sections made from perforated CRCA sheet. The sections are machine press bent as part of the bed's fabricated construction.
The perforated sheet provides a structured metal surface beneath the mattress while allowing the backrest portion to move independently from the fixed lower section.
The bed framework is mounted on 10 cm diameter swivel castors, allowing the bed to be moved and repositioned within appropriate hospital and healthcare environments.
Swivelling castors help staff manoeuvre the bed when room layout, cleaning or patient-care requirements make repositioning necessary.
Castor-mounted construction is useful in hospital wards and patient rooms where beds may need to be repositioned periodically.
The bed includes tubular head and foot bows of unequal height with vertical tube supports.
These structures form the two ends of the bed while also making the head and foot sections visually distinguishable during routine ward use.
Four provision points are incorporated into the bed for positioning an IV rod or saline stand. Multiple locations provide flexibility according to the patient's position, room arrangement and bedside access.
The published overall size of the Semi Fowler Bed General is 206 cm long × 90 cm wide × 60 cm high .
These measurements can help hospitals and institutional buyers plan room layouts, bed spacing and procurement requirements.
Hospital beds provide different levels of patient positioning. Selecting the correct type depends on the functions required by the healthcare facility.
Uses a fixed patient-support platform without an adjustable backrest mechanism.
Adds an adjustable backrest section so the patient's upper body can be elevated when needed.
Fowler models generally provide additional positioning functions beyond the adjustable backrest, depending on the specific bed design.
Bed selection should consider required positioning, nursing workflow, mobility and the facility's patient-care requirements.
The fabricated metal structure is finished with epoxy powder coating, providing a consistent finished surface across the bed frame.
Routine cleaning and maintenance should follow the healthcare facility's applicable procedures and be compatible with the materials and surface finish.
| Product Name | Semi Fowler Bed General |
|---|---|
| Product Code / SKU | 10015 |
| Brand | IS IndoSurgicals® |
| Product Type | Manual Semi Fowler Hospital Bed |
| Framework | Strong fabricated steel-tube construction |
| Patient Platform | Two-section perforated CRCA sheet, machine press bent |
| Backrest Adjustment | Manual screw-operated mechanism |
| Castors | 10 cm diameter swivel castors |
| Head & Foot Bows | Tubular, unequal height with vertical tube supports |
| IV / Saline Stand Locations | Four provision locations |
| Overall Length | 206 cm |
| Overall Width | 90 cm |
| Overall Height | 60 cm |
| Overall Size | 206 cm (L) × 90 cm (W) × 60 cm (H) |
| Finish | Epoxy powder coated |
| Power Requirement | No electrical power required for backrest adjustment |
| Suitable For | General wards, patient rooms, clinics, hospitals, healthcare institutions and institutional procurement |
The Semi Fowler Bed General is suited to facilities that need more positioning flexibility than a plain hospital bed while retaining a straightforward manual operating system.
Its adjustable backrest, castor-mounted construction and IV-rod provisions make it relevant for new hospital wards, replacement projects, healthcare expansion, institutional tenders, dealers and export requirements.
IndoSurgicals Private Limited manufactures, supplies and exports hospital beds and hospital furniture for hospitals, healthcare institutions, government procurement, distributors and international buyers.
The IndoSurgicals Semi Fowler Bed General – SKU 10015 combines a two-section perforated CRCA platform, screw-operated backrest adjustment, 10 cm swivel castors, four IV-rod locations and an epoxy powder-coated finish in a practical manual hospital-bed configuration.
Explore the complete range of Manual Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Semi Fowler Bed specifications, hospital procurement, government and institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
