Manual Semi Fowler hospital bed with crank-operated adjustable backrest, stainless-steel adjustment handle, two-section perforated CRCA sheet top, mild-steel ERW rectangular-tube framework, four IV-pole locations and H-type legs for general wards, patient rooms, clinics and institutional healthcare requirements.
The IndoSurgicals Semi Fowler Bed with ABS Panel is designed for healthcare facilities that require adjustable upper-body positioning in a straightforward manually operated hospital-bed configuration.
The bed uses a two-section uniformly perforated mild-steel CRCA sheet platform. Its backrest section is adjusted manually through a crank mechanism, allowing the patient's upper-body support position to be changed without electrical power.
A mild-steel ERW rectangular-tube framework, four IV-pole provision locations and H-type legs with rubber shoes complete the published construction. The bed is supplied in knock-down condition for assembly at the destination.
A Semi Fowler bed provides an adjustable backrest that allows the patient's upper body to be elevated from a completely flat position when clinically appropriate.
Compared with a plain fixed hospital bed, this gives healthcare staff more flexibility when arranging the patient for rest, feeding, examination, nursing care and other appropriate bedside activities.
On this model, the backrest adjustment is performed mechanically through a manual crank system.
Crank-operated mechanism allows the back section to be raised or lowered without electric actuators.
Stainless-steel adjustment handle is provided for operating the backrest mechanism.
Two-section construction allows the backrest portion to move while the lower section remains supportive.
Uniformly perforated mild-steel CRCA sheet forms the patient-support platform beneath the mattress.
Mild-steel ERW rectangular tubes form the principal structural framework of the bed.
Four provision points are incorporated into the frame for positioning a telescopic IV pole.
H-type leg construction provides the fixed support arrangement specified for this bed.
Rubber shoes are fitted to the legs to provide contact protection at floor level.
The bed is supplied in knock-down condition for assembly after delivery.
The main positioning feature of this model is its adjustable backrest section. The mechanism is operated manually using the supplied stainless-steel handle.
The backrest does not depend on an electric motor, control handset or mains power supply.
Raising the backrest allows the patient's torso to be supported above the horizontal position when clinically appropriate.
The mattress-support platform is manufactured from uniformly perforated mild-steel CRCA sheet and divided into two functional sections.
The upper section forms the adjustable backrest while the lower section completes the remaining patient-support surface.
The main structural frame of the bed is manufactured from mild-steel ERW rectangular tubes.
This framework supports the two-section platform, IV-pole provision points and H-type leg arrangement.
The bed frame incorporates four locations for a telescopic IV pole, allowing the pole to be positioned according to patient access and bedside-equipment requirements.
This model uses H-type fixed legs fitted with rubber shoes.
Unlike castor-mounted hospital beds, this configuration is designed as a fixed-leg bed. The rubber shoes provide a contact interface between the metal leg structure and the floor.
The Semi Fowler Bed with ABS Panel is supplied in knock-down condition.
This means the bed is delivered in a form intended to be assembled at the destination rather than necessarily being supplied as one completely assembled structure.
The published overall dimensions of this model are 206 cm long × 91 cm wide × 61 cm high .
These dimensions can help hospitals, dealers, architects and procurement teams plan room layouts, bed spacing and institutional requirements.
Applicable mild-steel surfaces are pre-treated and powder coated to provide a uniform finished surface for routine institutional use.
Cleaning and maintenance should follow procedures compatible with the bed's powder-coated metal surfaces and ABS components.
Publishes a manually adjustable backrest section as its principal patient-positioning function.
Depending on the model, a Fowler bed may add knee-rest adjustment in addition to an adjustable backrest.
| Product Name | Semi Fowler Bed with ABS Panel |
|---|---|
| Brand | IS IndoSurgicals® |
| Product Type | Manual Semi Fowler Hospital Bed |
| Overall Size | 206 cm (L) × 91 cm (W) × 61 cm (H) |
| Backrest | Manually adjustable |
| Adjustment System | Crank-operated mechanism |
| Adjustment Handle | Stainless steel |
| Patient Platform | Two-section uniformly perforated mild-steel CRCA sheet top |
| Framework | Mild-steel ERW rectangular tubes |
| IV Pole Provision | Four locations for telescopic IV pole |
| Leg Type | H-type legs |
| Leg Shoes | Rubber shoes |
| Finish | Pre-treated and powder coated |
| Supply Condition | Knock-down condition |
| Power Requirement | No electrical power required for backrest adjustment |
| Suitable For | General wards, inpatient rooms, hospitals, clinics, healthcare institutions and institutional procurement |
This model is suitable for buyers looking for a fixed-leg manual Semi Fowler hospital bed with adjustable backrest and ABS panel configuration .
Its published dimensions, CRCA platform, ERW tube framework, four IV-pole locations and knock-down supply format can be considered during hospital procurement, institutional projects, distributor requirements and export quotations.
IndoSurgicals Private Limited manufactures, supplies and exports Semi Fowler beds, Fowler beds, ICU beds and other hospital furniture for hospitals, institutions, government procurement, distributors and international buyers.
The IndoSurgicals Semi Fowler Bed with ABS Panel – this model combines manual backrest adjustment, a two-section CRCA platform, mild-steel ERW framework, four IV-pole locations and fixed H-type legs in a practical hospital-bed design.
Explore the complete range of Manual Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Semi Fowler Bed specifications, hospital procurement, government and institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
