General-purpose mechanical Fowler hospital bed with manual crank-operated backrest and knee-rest adjustment, a four-section sheet-metal patient platform, castor-mounted mobility and a pre-treated powder-coated finish , designed for general wards, inpatient rooms, recovery areas and institutional healthcare requirements.
The IndoSurgicals Fowler Bed General is designed for hospitals and healthcare institutions requiring a practical manually adjustable patient bed for routine inpatient care.
Its four-section sheet-metal patient platform incorporates adjustable back and knee-rest sections. Both positioning functions are operated manually through a crank mechanism, providing greater flexibility than a completely fixed plain hospital bed.
Castor-mounted construction allows appropriate movement and repositioning within the healthcare facility, while the bed's approximately 2030 × 900 × 600 mm overall dimensions provide a straightforward configuration for general hospital use.
A Fowler hospital bed provides adjustable sections within the patient-support platform so that the patient does not have to remain in a completely flat, fixed position.
On the IndoSurgicals Fowler Bed General, the published adjustable sections are the backrest and knee rest. These functions allow the patient's upper-body and lower-body support configuration to be changed when clinically appropriate.
Because the positioning system is mechanically operated, the published backrest and knee-rest movements do not depend on an electric motor or electronic handset.
Four-section sheet-metal construction forms the patient-support platform and accommodates the adjustable back and knee-rest sections.
Mechanical crank controls provide adjustment of the published movable sections without electrical actuation.
The upper section can be elevated or lowered to alter upper-body support when appropriate.
The knee-rest section can also be repositioned through the manual crank mechanism.
Castors support appropriate movement and repositioning within hospital and institutional environments.
Approximate published overall bed length is 2030 mm.
Approximate published overall bed width is 900 mm.
Approximate published overall bed height is 600 mm.
Applicable metal components are pre-treated and powder coated to provide a uniform finished surface.
Two main patient-positioning functions distinguish the Fowler Bed General from a completely fixed hospital bed.
The upper section of the patient platform can be raised from the horizontal position to support the patient's torso in an elevated position when clinically appropriate.
The knee-rest section can be repositioned to alter the configuration of the patient's lower-body support.
The Fowler Bed General uses a manual crank system to operate its published backrest and knee-rest functions.
Position adjustment is performed mechanically, without depending on electrically powered actuators.
The published backrest and knee-rest functions can be operated without an electronic handset or mains electrical supply.
The bed uses a four-section sheet-metal top as the structural patient-support platform beneath an appropriate hospital mattress.
Dividing the top into sections allows the backrest and knee-rest portions to move while the remaining platform continues to provide mattress support.
SKU 10011 is fitted with castors for mobility, allowing the bed to be repositioned within appropriate healthcare areas.
Mobility can be useful during ward rearrangement, environmental cleaning and other appropriate patient-care or facility-management activities.
The published overall dimensions of the Fowler Bed General are approximately 2030 mm long × 900 mm wide × 600 mm high .
These dimensions can assist hospitals, distributors, architects and procurement teams when planning patient rooms, ward layouts and institutional specifications.
Applicable metal components are pre-treated and powder coated to provide a consistent finished surface for regular institutional use.
Cleaning and maintenance should follow the current product-care recommendations and healthcare-facility procedures appropriate to the materials and finish.
Uses a fixed patient-support platform without adjustable backrest and knee-rest functions.
Provides manual backrest and knee-rest adjustment through a mechanical crank system.
The exact difference between Fowler and Semi Fowler hospital beds depends on the published functions of each model.
Semi Fowler models commonly provide adjustable backrest positioning, depending on the specific product configuration.
Specifically provides both backrest and knee-rest adjustment through a manual crank system.
IndoSurgicals offers several Fowler-bed configurations. The correct model should be selected according to the exact construction and features required for the healthcare facility or procurement specification.
Provides the core mechanical Fowler functions: four-section platform, manual backrest and knee-rest adjustment, castor mobility and a powder-coated finish.
Other models may add specifically published ABS or stainless-steel panel configurations while retaining similar Fowler positioning functions.
Provides manual backrest and knee-rest adjustment with an approximately 600 mm published overall bed height.
Depending on the model, ICU beds may add Hi-Lo, Trendelenburg, Reverse Trendelenburg, advanced side rails or other critical-care functions.
| Product Name | Fowler Bed General |
|---|---|
| Product Code / SKU | 10011 |
| Brand | IS IndoSurgicals® |
| Product Type | Mechanical / Manual Fowler Hospital Bed |
| Patient Platform | Four-section sheet-metal top |
| Backrest | Manually adjustable |
| Knee Rest | Manually adjustable |
| Adjustment System | Manual crank-operated system |
| Mobility | Castor mounted |
| Overall Length | Approx. 2030 mm |
| Overall Width | Approx. 900 mm |
| Overall Height | Approx. 600 mm |
| Overall Size | Approx. 2030 mm (L) × 900 mm (W) × 600 mm (H) |
| Finish | Pre-treated and powder coated |
| Electrical Power Required | No, for the published backrest and knee-rest adjustment functions |
| Suitable For | General wards, inpatient rooms, recovery areas, clinics, hospitals, healthcare institutions and institutional procurement |
SKU 10011 is suitable for buyers seeking a straightforward mechanically adjustable Fowler bed with backrest and knee-rest positioning, without adding unconfirmed specialised ICU functions.
Its four-section platform, crank-operated adjustment, published dimensions and castor-mounted configuration can be considered when preparing ward-development specifications, hospital procurement documents, distributor requirements and institutional tenders.
IndoSurgicals Private Limited manufactures, supplies and exports Fowler beds, Semi Fowler beds, ICU beds and other hospital furniture for hospitals, healthcare institutions, government procurement, dealers, distributors and international buyers.
The IndoSurgicals Fowler Bed General – SKU 10011 combines manual backrest and knee-rest adjustment, a four-section sheet-metal patient platform, castor-mounted mobility and a pre-treated powder-coated finish in a practical mechanical Fowler-bed configuration.
Explore the complete range of Manual Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Fowler Bed General specifications, hospital procurement, government and institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
