Mechanically adjustable Fowler hospital bed featuring manual crank-operated backrest and knee-rest adjustment, a four-section sheet-metal patient platform, SS panel configuration, castor-mounted mobility and a pre-treated powder-coated finish for general wards, patient rooms, recovery areas and institutional healthcare requirements.
The IndoSurgicals Fowler Bed with SS Laminated Panel is designed for hospitals and healthcare institutions that require manually adjustable patient positioning together with a stainless-steel panel configuration.
The bed uses a four-section sheet-metal patient platform. Its back section and knee rest can be repositioned manually through a crank-operated mechanism, providing greater positioning flexibility than a fixed plain hospital bed.
Standard SS panels distinguish this model from Fowler beds supplied with ABS panel configurations, while castors provide mobility for appropriate movement and repositioning within healthcare environments.
A Fowler hospital bed uses an adjustable patient-support platform that allows selected sections of the bed to be repositioned rather than remaining completely flat and fixed.
On SKU 10010, the two published adjustable sections are the backrest and knee rest. Both are operated manually through a mechanical crank system.
This configuration can be suitable for healthcare facilities that need adjustable upper-body and lower-body support without requiring electrically powered bed actuators.
Four-section sheet-metal construction forms the patient-support platform and accommodates the adjustable sections.
Mechanical crank controls operate the backrest and knee-rest movements without electric actuators.
The upper patient-support section can be raised or lowered when an elevated torso position is required.
The knee-rest section can be repositioned through the published mechanical crank system.
Standard stainless-steel panels form an important distinguishing feature of SKU 10010.
Castors allow appropriate movement and repositioning of the Fowler bed within healthcare facilities.
Approximate published overall length is 2030 mm.
Approximate published overall width is 900 mm.
Applicable metal components are pre-treated and powder coated for a consistent finished surface.
The principal positioning functions of the Fowler Bed with SS Laminated Panel are its manually adjustable backrest and knee-rest sections.
The upper section can be elevated from the flat position to support the patient's torso when such positioning is appropriate.
The knee-rest section can be repositioned to change the configuration of the patient's lower-body support.
SKU 10010 uses a manual crank system for its published positioning functions.
The backrest and knee-rest sections are adjusted through mechanical crank operation rather than electrically powered motors.
The published adjustments can be operated without an electrical handset, actuator or mains power supply.
The patient-support area consists of a four-section sheet-metal top.
The sectional design allows the backrest and knee-rest portions to move independently while the remaining sections continue to support the mattress platform.
The key material distinction of SKU 10010 is its standard SS panel configuration.
This gives buyers an alternative to Fowler bed models supplied with moulded ABS panel systems.
The current specification identifies standard SS panels as part of the Fowler bed configuration.
Hospitals and institutional buyers can select this model where an SS panel configuration is preferred over moulded ABS end panels.
The Fowler Bed with SS Laminated Panel is equipped with castors for mobility.
Castors allow the bed to be moved or repositioned within appropriate hospital areas for room arrangement, cleaning or patient-care requirements.
The published overall dimensions of the Fowler Bed with SS Laminated Panel are approximately 2030 mm long × 900 mm wide × 600 mm high .
These dimensions can help hospitals, distributors, architects and procurement teams plan ward layouts, patient-room spaces and institutional requirements.
Applicable fabricated metal components are pre-treated and powder coated to provide a uniform finished surface for routine institutional use.
Cleaning and routine maintenance should be carried out using procedures compatible with the bed's individual metal surfaces and finishes.
Uses a fixed patient-support platform without adjustable backrest and knee-rest sections.
Provides manually adjustable backrest and knee-rest positioning through a crank-operated mechanism.
Fowler and Semi Fowler beds should be compared by their exact published functions rather than by product name alone.
Semi Fowler models commonly provide adjustable backrest positioning, depending on the exact model.
Specifically includes both backrest and knee-rest adjustment using a manual crank system.
IndoSurgicals offers Fowler beds with different end-panel configurations, allowing institutional buyers to choose according to their required specification.
Uses the published standard stainless-steel panel configuration together with manual backrest and knee-rest adjustment.
Uses moulded ABS panel components instead of the SS panel configuration specified for SKU 10010.
Buyers can therefore compare models according to preferred panel construction as well as their required adjustment and accessory specifications.
Provides manual backrest and knee-rest adjustment with a published fixed overall height of approximately 600 mm.
Depending on the model, an ICU bed may provide additional functions such as Hi-Lo adjustment, Trendelenburg, Reverse Trendelenburg or other critical-care features.
| Product Name | Fowler Bed with SS Laminated Panel |
|---|---|
| Product Code / SKU | 10010 |
| Brand | IS IndoSurgicals® |
| Product Type | Mechanical / Manual Fowler Hospital Bed |
| Patient Platform | Four-section sheet-metal top |
| Backrest | Manually adjustable |
| Knee Rest | Manually adjustable |
| Adjustment System | Manual crank-operated system |
| Panel Configuration | Standard SS panels |
| Mobility | Castor mounted |
| Overall Length | Approx. 2030 mm |
| Overall Width | Approx. 900 mm |
| Overall Height | Approx. 600 mm |
| Overall Size | Approx. 2030 mm (L) × 900 mm (W) × 600 mm (H) |
| Finish | Pre-treated and powder coated |
| Electrical Power Required | No, for the published backrest and knee-rest adjustments |
| Suitable For | General wards, inpatient rooms, recovery areas, hospitals, clinics, healthcare institutions and institutional procurement |
SKU 10010 is relevant for buyers seeking a mechanically adjustable Fowler hospital bed with stainless-steel panel configuration and separate backrest and knee-rest positioning.
Its published dimensions, manual crank mechanism, four-section bed platform and castor-mounted construction can be considered during hospital procurement, ward expansion, healthcare infrastructure projects, distributor requirements and institutional tenders.
IndoSurgicals Private Limited manufactures, supplies and exports Fowler beds, Semi Fowler beds, ICU beds and other hospital furniture for hospitals, healthcare institutions, government procurement, dealers, distributors and international buyers.
The IndoSurgicals Fowler Bed with SS Laminated Panel – SKU 10010 combines manual backrest and knee-rest adjustment, a four-section sheet-metal patient platform, standard SS panels and castor-mounted mobility in a practical mechanical Fowler-bed configuration.
Explore the complete range of Manual Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Fowler Bed specifications, hospital procurement, government and institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
