Mechanically adjustable Fowler hospital bed with manual crank-operated backrest and knee-rest adjustment, a four-section sheet-metal patient platform, ABS panel configuration and castor-mounted mobility , designed for general wards, inpatient rooms, recovery areas and institutional healthcare requirements.
The IndoSurgicals Fowler Bed with ABS Panel is designed for healthcare facilities that require a manually adjustable patient bed with greater positioning flexibility than a fixed plain hospital bed.
A four-section sheet-metal top forms the patient-support platform. The back section and knee-rest can be adjusted manually through the bed's crank-operated mechanism, allowing the upper-body and lower-body support sections to be repositioned when appropriate.
The ABS panel configuration gives the bed a moulded end-panel design, while castors allow the bed to be moved or repositioned within suitable healthcare environments.
A Fowler bed is a hospital bed designed to provide adjustable patient positioning rather than keeping the entire mattress platform fixed.
In SKU 10009, both the backrest and knee-rest sections are adjustable. These movements are produced manually through a crank system, without the use of electrically powered actuators.
The resulting configuration provides healthcare facilities with a practical option where adjustable upper-body and knee positioning are required but electric bed controls are not part of the specification.
A four-section sheet-metal platform forms the mattress-support surface and accommodates the adjustable sections.
Backrest and knee-rest positioning is controlled manually through the bed's crank system.
The upper section of the patient platform can be raised or lowered as required for appropriate patient positioning.
The knee-rest section can also be repositioned manually through the published crank system.
ABS components provide the published panel configuration for this Fowler hospital bed.
Castors allow appropriate movement and repositioning of the bed within healthcare environments.
Published overall bed length is approximately 2030 mm.
Published overall width is approximately 900 mm.
Applicable metal surfaces are pre-treated and powder coated for a consistent finished surface.
The two principal positioning functions of SKU 10009 are the adjustable backrest and knee rest.
The upper section of the platform can be elevated from the horizontal position to support the patient's torso when that position is appropriate.
The knee-rest section can be repositioned to change the configuration of the lower portion of the patient-support platform.
The Fowler Bed with ABS Panel uses a manual crank system for its published patient-positioning movements.
Staff operate the backrest and knee-rest sections through mechanical crank controls.
The published adjustment functions do not depend on electric motors, electronic handsets or a mains power supply.
The bed uses a four-section sheet-metal top as its patient-support platform.
Dividing the top into multiple sections allows the backrest and knee-rest portions to move while maintaining the remaining mattress-support structure.
The defining material feature in the product name is its ABS panel configuration.
Moulded ABS panels provide a different hospital-furniture appearance from traditional open tubular head and foot bows or laminated metal-framed end panels.
ABS gives the bed a formed end-panel design suitable for modern ward and patient-room environments.
ABS surfaces should be cleaned using methods and agents compatible with the material and the healthcare facility's cleaning procedures.
The Fowler Bed with ABS Panel is equipped with castors for mobility, allowing the bed to be repositioned within appropriate hospital environments.
Castor-mounted construction can be useful when beds need to be moved for room arrangement, environmental cleaning or other appropriate patient-care requirements.
The published overall dimensions of the Fowler Bed with ABS Panel are approximately 2030 mm long × 900 mm wide × 600 mm high .
These dimensions are useful for ward-layout planning, patient-room allocation, procurement documents and hospital-furniture specifications.
Applicable metal sections are pre-treated and powder coated to provide a finished surface for regular institutional use.
Routine care should account for the different materials used in the bed, including powder-coated metal components and ABS panel surfaces.
Uses a fixed patient-support platform without mechanically adjustable backrest and knee-rest sections.
Provides manual backrest and knee-rest adjustment through a crank-operated system.
The exact difference between Fowler and Semi Fowler beds depends on the functions published for each particular model.
A Semi Fowler model commonly centres on adjustable upper-body or backrest positioning, depending on its exact specification.
Specifically includes both an adjustable back section and knee rest operated through a manual crank system.
SKU 10009 should be positioned as a Fowler hospital bed rather than an advanced ICU bed.
Provides manual backrest and knee-rest adjustment with a fixed published overall height of approximately 600 mm.
Depending on the model, ICU beds may provide additional functions such as Hi-Lo adjustment, Trendelenburg, Reverse Trendelenburg or other critical-care features.
| Product Name | Fowler Bed with ABS Panel |
|---|---|
| Product Code / SKU | 10009 |
| Brand | IS IndoSurgicals® |
| Product Type | Mechanical / Manual Fowler Hospital Bed |
| Patient Platform | Four-section sheet-metal top |
| Backrest | Manually adjustable |
| Knee Rest | Manually adjustable |
| Adjustment System | Manual crank-operated |
| Panel Configuration | ABS panel |
| Mobility | Castor mounted |
| Overall Length | Approx. 2030 mm |
| Overall Width | Approx. 900 mm |
| Overall Height | Approx. 600 mm |
| Overall Size | Approx. 2030 mm (L) × 900 mm (W) × 600 mm (H) |
| Finish | Pre-treated and powder coated |
| Electrical Power Required | No, for the published backrest and knee-rest adjustments |
| Suitable For | General wards, inpatient rooms, recovery areas, hospitals, clinics, healthcare institutions and institutional procurement |
SKU 10009 is suitable for buyers seeking a manually adjustable Fowler bed with ABS panel configuration and separate backrest and knee-rest positioning.
Its published dimensions, manual crank mechanism, four-section platform and mobile castor-mounted construction can be considered during hospital procurement, ward expansion, healthcare infrastructure projects and institutional tenders.
IndoSurgicals Private Limited manufactures, supplies and exports Fowler beds, Semi Fowler beds, ICU beds and other hospital furniture for hospitals, healthcare institutions, government procurement, dealers, distributors and international buyers.
The IndoSurgicals Fowler Bed with ABS Panel – SKU 10009 combines manual backrest and knee-rest adjustment, a four-section sheet-metal patient platform, ABS panel construction and castor-mounted mobility in a practical mechanical hospital-bed configuration.
Explore the complete range of Manual Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Fowler Bed specifications, hospital procurement, government and institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
