Manual Fowler hospital bed featuring crank-operated backrest and knee-rest adjustment, a four-section sheet-metal platform, ABS head and foot panels, ABS safety side rails, castor-mounted mobility and a pre-treated powder-coated finish for general wards, patient rooms, recovery areas and institutional healthcare requirements.
The IndoSurgicals Fowler Bed Mechanical with ABS Panel and ABS Safety Rails is designed for healthcare facilities that need more patient-positioning flexibility than a plain or basic Semi Fowler bed while retaining a straightforward manually operated system.
The bed uses a four-section sheet-metal patient platform. Its back section and knee-rest can be repositioned manually through a crank-operated mechanism, allowing the patient's upper and lower body support sections to be adjusted independently as required.
ABS end panels and ABS safety rails provide the published side and end configuration, while castor-mounted construction allows the bed to be repositioned within appropriate hospital and healthcare areas.
A Fowler hospital bed is designed to provide adjustable patient positioning beyond the capabilities of a fixed plain bed.
On SKU 10008, the principal adjustable sections are the backrest and knee rest. These sections are controlled manually through a crank system, allowing staff to modify the configuration of the patient-support platform without an electric actuator.
This makes the model suitable for hospital wards and patient-care environments where adjustable upper-body and knee positioning are required but electrically operated bed functions are not specified.
Four-section sheet-metal platform forms the mattress-support surface and accommodates the published positioning functions.
Mechanical crank controls operate the adjustable backrest and knee-rest sections without requiring electric actuators.
The back section can be elevated or lowered to change the patient's upper-body position.
The knee-rest section can also be repositioned manually through the published crank system.
ABS panels form the published end-panel configuration of this Fowler hospital bed.
Standard ABS side railings provide a physical boundary alongside the patient-support platform.
Castors support movement and repositioning within appropriate hospital and healthcare areas.
Published dimensions are approximately 2030 × 900 × 600 mm.
Applicable metal surfaces are pre-treated and powder coated to provide a finished hospital-bed structure.
The Fowler Bed Mechanical provides two important patient-platform adjustments through its manual crank mechanism.
The upper section of the bed can be raised from the horizontal position to support the patient's torso in a more elevated posture when appropriate.
The knee-rest section can be repositioned to change the configuration of the patient's lower-body support.
SKU 10008 uses a manual crank system for the published positioning functions.
This means backrest and knee-rest adjustment do not depend on electrically powered actuators, electronic handsets or battery systems.
Staff adjust the published movable sections through the crank mechanism rather than electric controls.
The specified backrest and knee-rest movements can be operated without a mains electrical supply.
The patient-support surface consists of a four-section sheet-metal top.
The sectional configuration allows the platform to accommodate the backrest and knee-rest movements while providing the structural surface beneath an appropriate patient mattress.
The Fowler bed is supplied with the published ABS panel configuration at the ends of the bed.
ABS panels provide a moulded alternative to traditional open tubular head and foot bows and give the bed a more integrated hospital-furniture appearance.
ABS construction provides the specified end-panel design for SKU 10008.
ABS components should be cleaned using methods and agents compatible with the material and the healthcare facility's cleaning procedures.
The published configuration includes standard ABS safety railings alongside the patient-support platform.
The side rails provide a physical boundary at the sides of the mattress area and form part of the bed's patient-support configuration.
SKU 10008 is supplied with castor-mounted construction to support movement and repositioning within appropriate hospital environments.
This can assist staff when adjusting room layouts, moving the bed for cleaning or repositioning it according to patient-care requirements.
The published overall dimensions of the Fowler Bed Mechanical with ABS Panel and ABS Safety Rails are approximately 2030 mm long × 900 mm wide × 600 mm high .
These measurements can assist hospitals, healthcare planners, distributors and procurement teams when planning bed spaces, ward layouts and institutional specifications.
Applicable metal sections of the bed are pre-treated and powder coated to provide a uniform finished surface for regular institutional use.
Routine cleaning and maintenance should consider the different materials used in the bed, including its powder-coated metal components and ABS panels and rails.
Fowler and Semi Fowler beds may look similar, but their published positioning functions can differ between models.
A Semi Fowler model generally centres on an adjustable backrest, depending on the exact product specification.
Provides both backrest and knee-rest adjustment through a mechanical crank-operated system.
Buyers should therefore compare the exact published functions rather than selecting a bed only by category name.
Provides manual backrest and knee-rest adjustment in a four-section bed configuration with ABS panels and safety rails.
Depending on the specific model, ICU beds may add functions such as variable height, Trendelenburg, Reverse Trendelenburg, advanced side rails or other critical-care features.
| Product Name | Fowler Bed Mechanical with ABS Panel and ABS Safety Rails |
|---|---|
| Product Code / SKU | 10008 |
| Brand | IS IndoSurgicals® |
| Product Type | Mechanical / Manual Fowler Hospital Bed |
| Patient Platform | Four-section sheet-metal top |
| Backrest | Manually adjustable |
| Knee Rest | Manually adjustable |
| Adjustment System | Mechanical crank-operated system |
| Panels | ABS panel configuration |
| Safety Rails | Standard ABS railings |
| Mobility | Castor mounted |
| Overall Length | Approx. 2030 mm |
| Overall Width | Approx. 900 mm |
| Overall Height | Approx. 600 mm |
| Overall Size | Approx. 2030 mm (L) × 900 mm (W) × 600 mm (H) |
| Finish | Pre-treated and powder coated |
| Electrical Power Required | No, for the published mechanical backrest and knee-rest adjustments |
| Suitable For | General wards, inpatient rooms, hospitals, healthcare institutions, recovery areas and institutional procurement |
SKU 10008 is suitable for buyers who need a mechanically adjustable Fowler hospital bed with separate backrest and knee-rest positioning together with ABS panels and safety side rails.
Its published dimensions, manual operating system, four-section platform and castor-mounted configuration can be considered when preparing hospital procurement specifications, ward-expansion projects, distributor requirements and institutional tenders.
IndoSurgicals Private Limited manufactures, supplies and exports Fowler beds, Semi Fowler beds, ICU beds and other hospital furniture for hospitals, healthcare institutions, government procurement, dealers, distributors and international buyers.
The IndoSurgicals Fowler Bed Mechanical with ABS Panel and ABS Safety Rails – SKU 10008 combines manual backrest and knee-rest adjustment, a four-section sheet-metal platform, ABS end panels, ABS safety rails and castor-mounted mobility in a practical mechanical Fowler-bed configuration.
Explore the complete range of Manual Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Fowler Bed specifications, hospital procurement, government and institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
