Multi-function mechanical ICU hospital bed featuring backrest, knee-rest, Trendelenburg, Reverse Trendelenburg and Hi-Lo adjustment, a four-section perforated M.S. platform, laminated stainless-steel end panels, up/down safety rails and four IV-rod locations for intensive-care and critical-care environments.
The IndoSurgicals ICU Bed Mechanical with Laminated SS Panel is designed for hospitals that need a mechanically operated ICU bed with multiple patient-positioning functions and a stainless-steel laminated end-panel configuration.
Separate screw mechanisms operated from the foot end control the published backrest, knee-rest, Trendelenburg, Reverse Trendelenburg and Hi-Lo positions . This allows the bed to provide several positioning functions without relying on electric actuators.
A four-section perforated M.S. sheet platform, up/down safety side rails, telescopic IV rod, four IV locations and 125 mm castors complete the published hospital-bed configuration.
SKU 10006 is a multi-position mechanical ICU hospital bed. Its published movements are produced through separate screw mechanisms rather than electric motors.
The model provides substantially more positioning flexibility than a plain hospital bed or basic Semi Fowler bed because it combines adjustable backrest and knee rest with Trendelenburg, Reverse Trendelenburg and Hi-Lo height adjustment .
It is therefore suitable for consideration where a healthcare facility needs multiple mechanical positioning functions together with stainless-steel laminated end panels and mobile hospital-bed construction.
Fabricated from rectangular mild-steel tubing to form the main supporting structure of the ICU bed.
Four-section perforated M.S. sheet platform supports the bed's multiple positioning functions.
The upper-body section can be raised or lowered through its mechanical screw-operated control.
A separate mechanical adjustment controls the knee-rest section of the patient platform.
Trendelenburg positioning is included among the model's published mechanical functions.
Reverse Trendelenburg provides tilt in the opposite direction when clinically appropriate.
Overall bed height can be varied from approximately 60 cm to 80 cm.
The published head and foot configuration uses laminated stainless-steel panel construction.
Up-and-down side-rail design allows the rails to be repositioned according to bedside-access requirements.
Telescopic IV rod can be used with four published mounting locations around the bed.
Castor-mounted construction supports appropriate movement and repositioning in hospital areas.
Two castors incorporate brakes for stabilising the bed when positioned for patient use.
The principal functional advantage of SKU 10006 is the range of patient-support adjustments available through its mechanical control system.
Changes the elevation of the patient's upper-body support section.
Adjusts the section supporting the knee and lower-body area.
Tilts the bed with the head end lower than the foot end when clinically appropriate.
Tilts the bed in the opposite direction, with the head end above the foot end.
Adjusts the complete bed to different published working heights.
The published specification for SKU 10006 specifically includes both Trendelenburg and Reverse Trendelenburg adjustment.
The complete patient platform can be tilted so the head end is positioned below the foot end when that position is clinically selected.
The platform can also tilt in the opposite direction, positioning the head end above the foot end.
The four-section patient-support platform provides separate areas for backrest and knee-rest adjustment.
The back section can be elevated from the horizontal position to support the patient's upper body when clinically appropriate.
Knee-rest adjustment changes the configuration of the lower sections of the patient-support platform.
The bed provides a published overall height range of approximately 60 cm to 80 cm.
Approximate published minimum bed height: 60 cm.
Approximate published maximum bed height: 80 cm.
Variable bed height can help healthcare staff arrange the patient-support surface for appropriate nursing access, care activities and room configuration.
The mattress-support surface is formed from a four-section perforated M.S. sheet top.
The sectional design enables the bed platform to accommodate backrest, knee-rest and whole-bed positioning functions while forming the structural support beneath the mattress.
One of the key distinctions of SKU 10006 is its laminated stainless-steel head and foot panel configuration.
This differentiates the model from ICU-bed versions using moulded ABS end panels and gives institutional buyers an alternative material and design configuration.
The published specification identifies the head and foot end assemblies as laminated stainless-steel panels.
The laminated SS end-panel design can be selected where this construction is preferred for a hospital or institutional specification.
The bed incorporates up-and-down safety side railings along the patient platform.
When appropriately raised, they provide a physical boundary alongside the mattress platform. The rails can be lowered when greater bedside access is required.
SKU 10006 includes a telescopic IV rod with four provision locations.
Multiple mounting positions provide flexibility in placing the IV rod according to patient access, room layout and the arrangement of other bedside equipment.
The ICU bed is mounted on 125 mm diameter castors for appropriate movement and repositioning within the healthcare facility.
The published specification states that two castors are fitted with brakes.
Castor-mounted construction allows the bed to be repositioned when necessary for patient care, room arrangement or cleaning.
The two braked castors provide the published means of stabilising the bed in its intended stationary position.
The published overall dimensions are 210 cm long × 90 cm wide , with adjustable height from approximately 60 cm to 80 cm.
These measurements can assist hospitals, architects, distributors and procurement teams when planning ICU bed spaces and preparing institutional specifications.
The applicable fabricated metal framework is epoxy powder coated, providing a uniform finished surface for regular hospital use.
Cleaning and maintenance should follow current product-care recommendations and take account of the different materials used throughout the bed.
Both models provide extensive mechanical positioning, but the published end-panel and side-rail configurations are different.
Uses laminated stainless-steel end panels and an up/down side-rail configuration, while retaining backrest, knee-rest, Trendelenburg, Reverse Trendelenburg and Hi-Lo functions.
Uses moulded ABS head and foot panels with a collapsible / swing-away side-rail configuration, together with the same categories of published mechanical positioning.
The appropriate model can therefore be selected according to the required panel material, side-rail design and institutional specification.
SKU 10006 uses separate manual screw mechanisms for its published patient-positioning functions.
Electric models use powered actuators and electronic controls for their specified movements and represent a different operating system.
Selection should consider clinical workflow, hospital infrastructure, procurement requirements, required positioning functions and preferred operating method.
| Product Name | ICU Bed Mechanical with Laminated SS Panel |
|---|---|
| Product Code / SKU | 10006 |
| Brand | IS IndoSurgicals® |
| Product Type | Multi-Position Mechanical ICU Hospital Bed |
| Framework | Rectangular M.S. tube |
| Patient Platform | Four-section perforated M.S. sheet top |
| Backrest Adjustment | Mechanical screw-operated |
| Knee-Rest Adjustment | Mechanical screw-operated |
| Trendelenburg | Yes – mechanically adjustable |
| Reverse Trendelenburg | Yes – mechanically adjustable |
| Hi-Lo Adjustment | Mechanical adjustment |
| Adjustment Controls | Separate screws operated from foot end |
| Head & Foot Panels | Laminated stainless-steel panel configuration |
| Safety Side Rails | Up-and-down design |
| IV Rod | Telescopic |
| IV Rod Locations | Four |
| Castors | 125 mm diameter |
| Castor Brakes | Brakes on two castors |
| Overall Length | 210 cm |
| Overall Width | 90 cm |
| Height Range | 60–80 cm |
| Overall Size | 210 cm (L) × 90 cm (W) × 60–80 cm (H) |
| Finish | Epoxy powder coated |
| Suitable For | Intensive-care units, high-dependency areas, critical-care wards, hospitals, healthcare institutions and institutional procurement |
SKU 10006 is particularly relevant for healthcare buyers who require multiple mechanical ICU-bed positioning functions together with a laminated stainless-steel end-panel configuration.
Its published dimensions, mechanical adjustment functions, four IV locations, side-rail arrangement and castor configuration can be incorporated into hospital procurement specifications, healthcare infrastructure projects and institutional tenders.
IndoSurgicals Private Limited manufactures, supplies and exports ICU beds, hospital beds and hospital furniture for hospitals, healthcare institutions, government procurement, distributors and international buyers.
The IndoSurgicals ICU Bed Mechanical with Laminated SS Panel – SKU 10006 combines mechanical backrest, knee-rest, Trendelenburg, Reverse Trendelenburg and Hi-Lo positioning with laminated stainless-steel end panels, up/down side rails, four IV locations and castor-mounted mobility.
Explore the complete range of Manual Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Mechanical ICU Bed specifications, hospital and critical-care projects, government and institutional procurement, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
