Semi Fowler Bed, Electric with ABS Panel and SS Safety Rails
Electric Semi Fowler hospital bed featuring hand-remote-controlled backrest adjustment, a two-section perforated CRC sheet platform, ABS head and foot panels, collapsible stainless-steel safety rails, four IV-rod locations and 100 mm castors with brakes for hospitals, patient rooms, recovery areas and institutional healthcare requirements.
Electric Semi Fowler Bed with Remote-Controlled Backrest
The IndoSurgicals Semi Fowler Bed, Electric with ABS Panel and SS Safety Rails combines powered backrest positioning with the practical bedside features required in routine hospital environments.
Its patient-support platform consists of a two-section perforated CRC sheet top. The back section is moved by an electric actuator and controlled through a hand remote, allowing the backrest position to be adjusted without manual crank operation.
Collapsible stainless-steel side rails, ABS head and foot components, a telescopic IV rod with four provision locations and castor-mounted mobility complete the published configuration.
What is an Electric Semi Fowler Bed?
A Semi Fowler hospital bed provides an adjustable backrest so the patient's upper body can be elevated from a fully horizontal position when clinically appropriate.
In an electric Semi Fowler bed, the backrest movement is performed by an electrically powered actuator rather than a manual screw or crank mechanism.
On this model, the actuator is operated using a hand remote control, providing convenient adjustment of the published backrest function.
Key Features
Electric Backrest
Electric actuator provides powered adjustment of the backrest section.
Hand Remote Control
Backrest movement is controlled through a hand-operated remote system.
Two-Section Platform
Two-section construction separates the adjustable backrest from the remaining mattress-support surface.
Perforated CRC Sheet Top
Perforated CRC sheet forms the structural patient-support platform.
Rectangular M.S. Framework
Rectangular mild-steel tubes form the main supporting framework of the bed.
Stainless-Steel Side Rails
Collapsible stainless-steel side railings provide a physical boundary along the patient platform.
ABS Head & Foot Panels
ABS head and foot components provide the moulded end-panel configuration of this model.
Four IV Locations
Telescopic IV rod can be positioned using four published provision locations.
100 mm Castors
Four castor-mounted supports provide mobility, with brakes provided on two castors.
Electric Actuator for Backrest Adjustment
The defining function of this model is its electrically adjustable backrest.
An electric actuator moves the upper section of the patient platform, replacing the manual crank or screw mechanism found on mechanically operated Semi Fowler beds.
Powered Adjustment
The actuator provides powered movement of the backrest section when connected and operated according to the product instructions.
Hand Remote Operation
The specified remote control allows the backrest position to be changed without manually turning a mechanical crank.
Electric vs Manual Semi Fowler Bed
Electric Semi Fowler Bed – this model
Uses an electric actuator and hand remote to adjust the backrest section.
Manual Semi Fowler Bed
Uses a mechanical screw or crank arrangement to raise and lower the backrest.
The appropriate configuration depends on hospital workflow, infrastructure, procurement requirements and the preferred method of backrest operation.
Two-Section Perforated CRC Sheet Platform
The mattress-support area is made from a two-section perforated CRC sheet top.
The upper section serves as the electrically adjustable backrest, while the remaining section completes the patient-support platform.
Rectangular M.S. Tube Framework
The principal supporting structure of the bed is fabricated from rectangular mild-steel tubes.
This framework supports the two-section platform, electric backrest system, side rails, end components, IV provision and castor-mounted base.
Collapsible Stainless-Steel Safety Side Rails
This model is fitted with collapsible stainless-steel side railings along the patient platform.
When appropriately raised, the rails provide a physical boundary beside the mattress area. Their collapsible configuration permits greater bedside access when lowered.
ABS Head & Foot Panel Configuration
The product specification identifies ABS head and foot bows / panel components at the two ends of the bed.
The moulded ABS configuration provides a different end-panel design from beds using open tubular or laminated stainless-steel bow assemblies.
Telescopic IV Rod with Four Locations
The bed includes a telescopic IV rod with four provision locations.
Multiple mounting points provide flexibility in selecting an IV-rod position according to patient access and the arrangement of bedside equipment.
100 mm Castors with Two Brakes
This model is mounted on 100 mm diameter castors for movement and repositioning within appropriate healthcare environments.
Two of the castors are equipped with brakes to help stabilise the bed when parked in its intended position.
Hospital Mobility
Castor-mounted construction allows staff to reposition the bed for room arrangement, cleaning or appropriate patient-care activities.
Two Braked Castors
Two wheels incorporate the published braking mechanism for stationary positioning.
Electric Semi Fowler Bed Dimensions
The published overall dimensions of the Semi Fowler Bed, Electric with ABS Panel and SS Safety Rails are approximately 1900 mm long × 900 mm wide × 600 mm high .
These measurements can assist hospitals, distributors, architects and procurement teams when planning ward layouts, patient rooms and institutional requirements.
Pre-Treated & Epoxy Powder-Coated Finish
Applicable fabricated metal components are pre-treated and epoxy powder coated to provide a consistent finished surface for regular institutional use.
Routine cleaning and maintenance should take into account the different materials used throughout the bed, including powder-coated steel, stainless-steel side rails and ABS end components.
Suitable Healthcare Applications
Electric Semi Fowler Bed vs Electric Fowler Bed
This model Semi Fowler Bed
Provides an electrically adjustable backrest section as its published powered positioning function.
Electric Fowler Bed
Depending on the particular model, an electric Fowler bed may provide additional knee-rest adjustment along with backrest movement.
Buyers should compare the exact model specification rather than assuming that every electric hospital bed provides the same positioning functions.
Electric Semi Fowler Bed vs Multi-Function ICU Bed
This model
Focuses on electrically powered backrest positioning with stainless-steel side rails and practical bedside support features.
Multi-Function Electric ICU Bed
Depending on its specification, an ICU model may additionally provide knee-rest, Hi-Lo, Trendelenburg and Reverse Trendelenburg functions.
Semi Fowler Bed, Electric with ABS Panel and SS Safety Rails Specifications
| Product Name | Semi Fowler Bed, Electric with ABS Panel and SS Safety Rails |
|---|---|
| Brand | IS IndoSurgicals® |
| Product Type | Electric Semi Fowler Hospital Bed |
| Framework | Rectangular M.S. tubes |
| Patient Platform | Two-section perforated CRC sheet top |
| Backrest Adjustment | Electric actuator |
| Control System | Hand remote control |
| Safety Side Rails | Collapsible stainless-steel design |
| Head & Foot Components | ABS |
| IV Rod | Telescopic |
| IV Rod Locations | Four |
| Castors | 100 mm diameter deluxe castors |
| Castor Brakes | Brakes on two castors |
| Overall Length | Approx. 1900 mm |
| Overall Width | Approx. 900 mm |
| Overall Height | Approx. 600 mm |
| Overall Size | Approx. 1900 mm (L) × 900 mm (W) × 600 mm (H) |
| Finish | Pre-treated and epoxy powder coated |
| Suitable For | General wards, inpatient rooms, recovery areas, hospitals, clinics, healthcare institutions and institutional procurement |
For Hospitals, Projects & Institutional Procurement
This model is relevant for buyers seeking an electric Semi Fowler hospital bed with remote-controlled backrest adjustment together with stainless-steel side rails, ABS end components and IV-pole provision.
Its published dimensions, electrical operating method, side-rail configuration, four IV locations and castor arrangement can be considered when preparing hospital procurement specifications, distributor requirements and healthcare infrastructure projects.
Electric Semi Fowler Bed Manufacturer, Supplier & Exporter in India
IndoSurgicals Private Limited manufactures, supplies and exports electric hospital beds, ICU beds, Fowler beds, Semi Fowler beds and other hospital furniture for hospitals, healthcare institutions, government procurement, distributors and international buyers.
The IndoSurgicals Semi Fowler Bed, Electric with ABS Panel and SS Safety Rails – this model combines powered backrest adjustment, a two-section CRC platform, stainless-steel collapsible side rails, ABS end components, four IV locations and castor-mounted mobility.
Explore the complete range of Electric Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Hospital, Institutional & Export Requirements
Contact IndoSurgicals for Electric Semi Fowler Bed specifications, hospital procurement, institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicals