Two-function electric Fowler hospital bed with electrically adjustable backrest and knee rest, four-section perforated CRC sheet platform, ABS head and foot panels, moulded ABS safety rails, telescopic IV rod with four locations and 100 mm castors for hospital wards, inpatient rooms, recovery areas and institutional healthcare requirements.
The IndoSurgicals Fowler Bed, Electric with ABS Panel and ABS Safety Rails is designed for healthcare facilities that require powered adjustment of both the upper-body and knee-support sections of the patient platform.
SKU 10007 is classified as a 2-function electric Fowler bed. Its backrest and knee-rest sections are operated through an electric actuator system, eliminating the manual crank operation used on mechanical Fowler-bed models.
A four-section perforated CRC sheet platform, rectangular mild-steel framework, ABS end panels, moulded ABS safety railings, IV-pole provision and castor-mounted mobility complete the published configuration.
A Fowler hospital bed provides adjustable sections that allow the patient-support platform to be configured beyond a completely flat position.
On this model, the two published powered functions are backrest adjustment and knee-rest adjustment. Both movements are electrically actuated rather than mechanically operated by a crank.
The combination allows the upper-body and knee-support sections to be repositioned according to appropriate patient-care requirements.
Provides powered adjustment of both the backrest and knee-rest sections.
Upper-body section can be raised or lowered through the electric actuator system.
Knee-supporting section is also electrically adjustable for appropriate patient positioning.
Four-section configuration accommodates the two published powered positioning functions.
Perforated CRC sheet forms the structural patient-support surface beneath the mattress.
Rectangular mild-steel tubing forms the main supporting framework of the hospital bed.
ABS head and foot components provide the moulded end-panel configuration.
Moulded ABS side railings provide a physical boundary along the patient-support platform.
Telescopic IV rod can be positioned using four published mounting locations.
Deluxe 100 mm diameter castors provide castor-mounted hospital-bed mobility.
Two castors incorporate brakes to stabilise the bed when parked.
Applicable metal surfaces are pre-treated and epoxy powder coated.
The primary functional advantage of SKU 10007 is that both important Fowler-bed positioning sections are electrically adjustable.
The upper section of the patient platform can be raised from or returned toward the horizontal position through the electric actuator system.
The knee-rest section can also be repositioned electrically to alter lower-body support according to appropriate patient-care requirements.
Uses powered actuator operation for the published backrest and knee-rest functions.
Uses manual crank or screw mechanisms to adjust corresponding patient-support sections.
The appropriate choice depends on hospital workflow, procurement requirements, available infrastructure and the preferred method of patient-platform adjustment.
The mattress-support area consists of a four-section perforated CRC sheet top.
The four-section configuration accommodates the electrically adjustable backrest and knee-rest sections while the remaining sections complete the patient-support platform.
The principal structural framework is constructed from rectangular M.S. tubes.
This framework supports the multi-section bed platform, electrical positioning system, end-panel components, safety rails, IV provision and castor-mounted base.
SKU 10007 uses ABS head and foot components, providing a moulded end-panel configuration.
This distinguishes the model from hospital beds using traditional open tubular or laminated stainless-steel end-panel arrangements.
The bed incorporates ABS moulded safety side railings alongside the patient platform.
When appropriately positioned, side rails form a physical boundary alongside the mattress area as one component of the overall patient-support system.
The Fowler bed includes a telescopic IV rod with four provision locations.
Multiple locations provide flexibility in selecting an IV-rod position according to patient access and the arrangement of other bedside equipment.
SKU 10007 is mounted on 100 mm diameter deluxe castors for appropriate movement and repositioning within healthcare environments.
Two of the castors incorporate brakes to help stabilise the bed when it is parked in its intended position.
Castor-mounted construction allows the bed to be repositioned when necessary for room layout, cleaning or patient-care activities.
The published specification provides brakes on two castors for stationary positioning.
The published overall dimensions of the Electric Fowler Bed with ABS Panel and ABS Safety Rails are approximately 2030 mm long × 900 mm wide × 600 mm high .
These dimensions can assist hospital planners, distributors, architects and procurement teams when preparing ward layouts and institutional specifications.
Applicable fabricated metal components are pre-treated and epoxy powder coated to provide a uniform finished surface for regular institutional use.
Routine cleaning and maintenance should take into account the different materials used in the bed, including powder-coated metal and moulded ABS components.
The distinction is particularly important when comparing IndoSurgicals electric hospital-bed models.
Publishes two electrically adjustable functions: backrest and knee rest .
A Semi Fowler configuration may provide electric backrest adjustment without an electrically adjustable knee-rest function, depending on the specific model.
Buyers should therefore compare the number and type of powered functions instead of assuming that every electric hospital bed provides identical movements.
Provides electric backrest and knee-rest adjustment at a published fixed overall height of approximately 600 mm.
Depending on its specification, an ICU bed may additionally provide electric Hi-Lo adjustment, Trendelenburg, Reverse Trendelenburg or other critical-care positioning functions.
| Product Name | Fowler Bed, Electric with ABS Panel and ABS Safety Rails |
|---|---|
| Product Code / SKU | 10007 |
| Brand | IS IndoSurgicals® |
| Product Type | 2-Function Electric Fowler Hospital Bed |
| Overall Size | Approx. 2030 mm (L) × 900 mm (W) × 600 mm (H) |
| Framework | Rectangular M.S. tubes |
| Patient Platform | Four-section perforated CRC sheet top |
| Electric Function 1 | Backrest adjustment |
| Electric Function 2 | Knee-rest adjustment |
| Adjustment System | Electric actuator system |
| Head & Foot Components | ABS |
| Safety Side Rails | Moulded ABS |
| IV Rod | Telescopic |
| IV Rod Locations | Four |
| Castors | 100 mm diameter deluxe castors |
| Castor Brakes | Brakes on two castors |
| Finish | Pre-treated and epoxy powder coated |
| Suitable For | General wards, inpatient rooms, recovery areas, hospitals, healthcare institutions and institutional procurement |
SKU 10007 is particularly relevant for buyers seeking a 2-function electric Fowler hospital bed with electrically adjustable backrest and knee rest .
Its published dimensions, four-section CRC platform, ABS panel and side-rail configuration, IV provision and castor arrangement can be considered during hospital procurement, ward development, distributor requirements and healthcare infrastructure projects.
IndoSurgicals Private Limited manufactures, supplies and exports electric hospital beds, Fowler beds, Semi Fowler beds, ICU beds and other hospital furniture for hospitals, healthcare institutions, government procurement, distributors and international buyers.
The IndoSurgicals Electric Fowler Bed with ABS Panel and ABS Safety Rails – SKU 10007 combines two electrically adjustable positioning functions, a four-section CRC platform, ABS panels and safety rails, four IV locations and castor-mounted mobility.
Explore the complete range of Electric Hospital Beds or browse Hospital Furniture from IndoSurgicals.
Contact IndoSurgicals for Electric Fowler Bed specifications, hospital procurement, institutional requirements, dealer and distributor enquiries, bulk quantities or international export requirements.
Contact IndoSurgicalsProduct images and specifications are provided for general reference. Product design, colour, packaging and specifications may be updated without prior notice. Please confirm current specifications, certification scope and regulatory applicability before ordering.
