+91-11-49092567

General Labware

Specimen Jar (Gas Jar)

Product Details :
  • These transparent specimen jars, used for preserving different specimens in the lab are provided with a cap that fits in tight. These jars provided excellent protection to the species preserved in it.
  • Material: Polystyrene
  • Size: φ 50 mm X h 150 mm
  • Packing: 12 Pcs
Specimen Jar (Gas Jar)

Desiccator (Vacuum)

Product Details :
  • IndoSurgicals desiccators are made of polypropylene and polycarbonate. These autoclable vacuum desiccators can hold vacuum upto 740 mm of Hg for 24 hrs without any greasing. The top dome, moulded in rigid and transparent polycarbonate, gives a crystal clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome. The lower part is made of polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vacuum creation, shutting off & vacuum releasing.
  • Material: Polypropylene/Polycarbonate
Item Code Size (mm) Flange O.D. (mm)
I.D. (mm)
Packing
80165 150 171 150 1 Pc.
80166 200 232 199 1 Pc.
80167 250 276 240 1 Pc.
80168 300 340 300 1 Pc.
Desiccator (Vacuum)

Desiccator (Plain)

Product Details :
  • Plain Desiccators are physically the same as Vacuum desiccators. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Both Vacuum & Plan Desiccators are provided with a thick perforated Polypropylene disc with a big hole in the center for easy lifting. The tiny holes in the disc provide air troughs & support to the dishes. However porcelain discs are advisable in case of incandescent crucibles.
  • Material: Polypropylene/Polycarbonate
Item Code Size (mm) Flange O.D. (mm)
I.D. (mm)
Packing
80169 150 171 150 1 Pc.
80170 200 232 199 1 Pc.
80171 250 276 240 1 Pc.
80172 300 340 300 1 Pc.
Desiccator (Plain)

Kipp's Apparatus

Product Details :
  • IndoSurgicals Kipp's Apparatus made of polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the apparatus. H2S gas then evolved colletcs in the middle dome from where it can be released through a leak proof stopcock fitted with a self lubricating PTEE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.
  • Material: High Desity Polyethylene
Item Code Capacity
80173 250 ml
80174 500 ml
80175 1000 ml
Kipp's Apparatus

Test Tube Cap

Product Details :
  • This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leak proof one.
  • Cap for Test Tube φ25 mm
  • Material: Polypropylene
  • Packing: 100 Pcs
Test Tube Cap

Leclanche Cell Pot

Product Details :
  • Blown in polypropylene, this pot is used for making leclanche Cell. This pot too has very good contact clarity & excellent chemical resistance.
  • Material: Polypropylene
  • Packing: 12 Pcs
Leclanche Cell Pot

Simple Cell Pot

Product Details :
  • Simple Cell Pot, as the name suggests, is used for making simple cells & voltmeters etc. Moulded in polypropylene, this pot has very good contact clarity and excellent chemical resistance. Being in polypropylene, this pot is much durable than the one used conventionally.
  • Material: Polypropylene
  • Packing: 12 Pcs
Simple Cell Pot